1 Rookie
•
4 Posts
0
1404
April 19th, 2024 08:44
Ethernet 1/1/17 is up, line protocol is down with SFP 10G OS10
Hello All,
Please I need you assitance if anyone had the same situation.
I have plugged one Huawei (CE 5855-48) SFP 10G on the switch (Dell s5224F-ON), the problem is : the dell switch always showing that the Pluggable media present, SFP28 type is SFP28 25GBASE-SR-AOC,and the line protocol is down.
If we plug a Dell s5224F-ON SFP 10G into another switch Dell s5224F-ON, we have (the line protocol is up)
If we try to configure the Auto-Negotiation to Off or Auto, we have the same result (the line protocol is down)
Here is the show interface result :
OS10# show interface ethernet 1/1/7
Ethernet 1/1/7 is up, line protocol is down
Hardware is Eth, address is c4:5a:b1:75:ad:0c
Current address is c4:5a:b1:75:ad:0c
Pluggable media present, SFP28 type is SFP28 25GBASE-SR-AOC
Wavelength is 850
Interface index is 21
Internet address is not set
Mode of IPv4 Address Assignment: not set
Interface IPv6 oper status: Disabled
MTU 1532 bytes, IP MTU 1500 bytes
LineSpeed 0, Auto-Negotiation on
Configured FEC is cl108-rs, Negotiated FEC is off
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout: 60
Tag Protocol IDentifier (TPID) value: 0x8100
Last clearing of "show interface" counters: 04:57:28
Queuing strategy: fifo
Input statistics:
0 packets, 0 octets
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts, 0 Unicasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output statistics:
0 packets, 0 octets
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts, 0 Unicasts
0 throttles, 0 discarded, 0 Collisions, wred drops
Rate Info(interval 30 seconds):
Input 0 Mbits/sec, 0 packets/sec, 0% of line rate
Output 0 Mbits/sec, 0 packets/sec, 0% of line rate
Time since last interface status change: 04:57:29