1 Rookie
•
1 Message
0
62
July 17th, 2024 22:04
Dell S3100 Switch - 802.1X and MAB Integration Questions
Do you have a template for Dell S3100 OS 9 switch for configuring 802.1X for data devices and MAB for voice devices?
Also, I need to enable dynamic VLAN, it is untagged VLAN 10 for Data and tagged VLAN 20 for voice. Do you have a template for this?
Do you know what RADIUS attribute is accepted by Dell S3100 OS 9 for tagged VLANs?
No Events found!
DELL-Joey C
Moderator
•
3.9K Posts
0
July 18th, 2024 06:05
Hi,
There isn't any template for users to apply but here's the user guide for configuration example 802.1X: https://dell.to/3Se4cNE and https://dell.to/4d5uKsf. Whilst MAB: https://dell.to/3SheL2n
You will need Hybrid portmode, here's the guide: https://dell.to/4bNWPmT
That will be AAA. Here's the guide: https://dell.to/4d8evuO
Packet_Operator
1 Rookie
•
1 Message
0
November 26th, 2024 19:04
@DELL-Joey C Your response to the question "Do you know what RADIUS attribute is accepted by Dell S3100 OS 9 for tagged VLANs?" does not in any way answer the question. The link you provided talks about configuring an AAA server.
I have an open ticket with Dell support about this very thing. The switch will only assign VLANs as untagged. The RADIUS attributes (these are industry standard, by the way) are To specify that a VLAN should be tagged, you can use the Egress-VLAN-Name attribute (type 58) or Egress-VLANID as defined in RFC 4675. This attribute includes a VLAN name entry and a flag that dictates whether frames on the VLAN are tagged or untagged. It does not appear that the switch acknowledges either of these attributes when it receives the RADIUS ACCEPT packet containing either of those attributes. I came here hoping to figure out this exact issue while I wait for Dell support to get back to me.