This post is more than 5 years old
1 Rookie
•
68 Posts
0
913
August 19th, 2015 06:00
CCR on different Data Domain Devices
Hi,
is it possible to clone not just to 1 device but to 2 or 3 devices with one clone pool?
As an example.
My Backup Pool "WinGroup" finished and i want to clone it to pool "WinGroupClone" and write 3 clones to dd1, dd2 and dd3?
I am getting an error "Opening the file ..../volhdr failed ([5004] nothing matched)" - when i am trying to mount the volume and i think i am doing something wrong here
Regards
No Events found!
crazyrov
4 Operator
•
1.3K Posts
1
August 19th, 2015 06:00
Hi Patric,
For the first part of the question Yes, it is possible to achieve this, but you should remember that if all the 3 devices are mounted and idle at the time you initiate a clone you really don't have any control of where the clone saveset is going to be sent, so i am not sure what you are thinking when you are asking this question.
for the second part, When you say you are unable to mount the deice it means that you have not labeled it yet. Or it might be that this device was assigned to a different pool.
PatricJ
1 Rookie
•
68 Posts
0
August 20th, 2015 02:00
HI Crazyrov,
you helped me a lot. In the case i want one pool to be cloned to three different locations i now added a clonepool for every location and use sheduled cloning to clone pool1 to pool1clone1 and then pool1clone2 and pool1clone3
MSecond part: labeling and mounting helps
crazyrov
4 Operator
•
1.3K Posts
0
August 20th, 2015 06:00
That's great !! Please mark the thread as answered so that other can refer this thread on a similar situation.