This post is more than 5 years old
2 Intern
•
209 Posts
0
942
August 2nd, 2016 10:00
Area 51-R2, Titan X, power supply leads, SLI HB bridge
So ! The Pascal TiTan is for sale.. I will install this to my area 51 r2 (2014), nice! what if we want 2x
TiTans? Thatsa 2 slot brige or 3 slot mayB ?
No Events found!
DELL-Chris M
Community Manager
•
56.9K Posts
0
August 2nd, 2016 14:00
The Titan X requires one 8 pin + one 6 pin power supply leads. In my Area 51-R2 with one Titan X installed, I see two 6 pin and two 2 pin power supply leads not used on the bottom of the case which would be used for a second Titan X. You should open your case and look for unused power supply leads.
DELL-Chris M
Community Manager
•
56.9K Posts
0
August 2nd, 2016 14:00
According to the Nvidia Titan X page, you want the 60.96mm HB (High Bandwidth) bridge. They call it = SLI BRIDGE: 3-SLOT (60.96 MM). When looking at the motherboard spacing of the PCIe x16 slots, if we call the primary video card bridge connector 0, there are 3 slots to the secondary video card bridge connector. I am measuring the distance based on the spacing between the bottom PCIe x16 to the PCIe x4 slot and then counting up.
dbrewster
2 Intern
•
209 Posts
0
August 2nd, 2016 14:00
Thank you Chris, you always answer my questions so I can understand. 1 more thing,for power connection, the 6 pin power connection, ( 1 8 pin, 1 6 pin right?) needs a cable ordered to adapt 8 to 6?
so I have 2 8 pin connections now, and several 6 pin connections.. right? I mean between the PS and the x99.