This post is more than 5 years old
2 Intern
•
205 Posts
0
2061
June 23rd, 2016 07:00
Source based routing status
It seems that something has changed as far as routing goes in my last upgrade from 7.2.1.1 to 7.2.1.2 (as is typical for Isilon, please, yes, make changes in config with a 0.0.0.1 upgrade, thanks). I need to know whether source-based routing is enabled or not. Unfortunately, the documentation only says how to enable or disable it. Anyone know how to find out?
Thanks,
Ken
0 events found
No Events found!
bergec
275 Posts
0
June 23rd, 2016 07:00
Hello,
Run “isi networks” and you should see the following:
Source Based Rout... Enabled
Claude
carlilek
2 Intern
•
205 Posts
0
June 23rd, 2016 07:00
Thank you! I don't know why I didn't try that in the first place...
carlilek
2 Intern
•
205 Posts
0
June 26th, 2016 06:00
No, it didn't. Not sure if it was enabled before or if I'm chasing a different dragon. Could be the reboot I of the Isilon cluster, could be the new network core. Either way, something strange is happening with my networking.
dynamox
9 Legend
•
20.4K Posts
0
June 26th, 2016 06:00
did it get enabled ? (it shouldn't)
dynamox
9 Legend
•
20.4K Posts
0
June 26th, 2016 07:00
i have tons of static routes and it's always on my mind whenever we do upgrades ..to make sure they don't get "purged".