Skip to main content
Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

aidechoute

28 Posts

11413

January 22nd, 2013 00:00

Packet error on interface

Hi all,

I have install two PS6100 (SAN6 and SAN7) on a existing iscsi network.

All of my port on the powerconnect 6224 are configured, but I have a lot of packet error on all of my interface.

 

I don't know why....someone have an idea?

 

Thanks

aidechoute

28 Posts

January 22nd, 2013 05:00

Thanks for your answer.

I have contact the DELL support. We have unselect this option but the still the same.

After a lot of investigation we have try to set spanning-tree disable on the port of the switch.

This solution solve this packet error, but the tech don't explain me why the old PS (SAN1) doesn't have this error too.

Thanks for your help Joe

DELL-Joe S

7 Technologist

 • 

729 Posts

January 22nd, 2013 05:00

One thing to check is whether DCB is negotiated or not.  For non 10GbE environments it should be turned off.    To see what it is currently set at: Group Configuration> Advanced Tab> Network Management> Data Center Bridging, to disable - un-select Enable DCB

-joe

Was this post helpful?

View All

No Events found!

Top