This post is more than 5 years old
1 Rookie
•
72 Posts
0
5166
July 24th, 2012 13:00
Dell Equallogic
Can a Member be a part of multiple groups ??
No Events found!
This post is more than 5 years old
1 Rookie
•
72 Posts
0
5166
July 24th, 2012 13:00
Can a Member be a part of multiple groups ??
Top
Christian Hanse
1 Rookie
•
62 Posts
1
July 24th, 2012 13:00
No that is not possible.
It also cannot be a member of multiple storage pools
justsanjeev
1 Rookie
•
72 Posts
0
July 24th, 2012 14:00
how can we get the information about the system like an ipconfig in windows ??
DELL-Joe S
7 Technologist
•
729 Posts
0
July 24th, 2012 14:00
Telnet/SSH to the member in question, (or the group IP if only one member), then type the following:
member select member_name eth select port show
(Port - number of the network interface to modify or configure (0, 1, or 2). For example, specify 2 for eth2)
You can also use the EqualLogic PowerShell Cmdlets (download from the support site, where the HIT kit is located).
You may also what to download the CLI guide (on the support site where the Firmware is located)
-joe