This post is more than 5 years old
1 Rookie
•
29 Posts
0
19000
July 9th, 2015 16:00
VSM 4.0.2.1 not pulling information from groups
Hello
I deployed dell virtual storage manager 2 days ago and I added to PS groups to it
until now it is not pulling information's about the PS groups
both groups say connected capacity 0MB utilization 0%
both vcenter server and vsm appliance and PS management ports are on the same subnet they all talk to each other just fine , I have not added/configured ISCSI network on the appliance
any clues?
also trying to get to the diagnoses logs that are saved in the \\applianceipaddress\etc... it asks for username and password and I tried the defaults and it would never let me in
thank
No Events found!
Origin3k
4 Operator
•
2.3K Posts
1
July 10th, 2015 11:00
Please double check that you use the MGMT Group IP and not the IP of the MGMT Interface.
Regards,
Joerg
alshawwa
1 Rookie
•
29 Posts
0
July 10th, 2015 11:00
hello joerge
im using the group ip not the member mgmt. ip , it wont add ps group using member mgmt interface ip addresses anyways.
alshawwa
1 Rookie
•
29 Posts
0
July 10th, 2015 11:00
Hello Don
yes both PS arrays have dedicated managements ports " group management port" and these are the ports I am using to add them to the virtual appliance
I did what you suggested , I removed the appliance and made sure the plugins are completely removed from vcenter and rebooted it , and downloaded the latest VSM 4.5 and deployed it , no luck same issue
im currently reading the logs trying to get to the bottom of it but all what I see is this
2015-07-10 08:57:25,659 ERROR [com.equallogic.hitve.server.rmi.SmartReplicaHandler] (SmartReplicaHandler init:) No local peer found or local peer hostname is null?
2015-07-10 08:58:09,328 WARN [com.equallogic.hitve.server.rmi.VolumeHandler] (VCenter Observer:) No volume for datastore naa: naa.64ed2a85e79f0b2da54555c1820aa738
2015-07-10 08:58:09,346 ERROR [com.equallogic.hitve.server.rmi.VmVVolMappingHandler] (Thread-3 (HornetQ-client-global-threads-154857595):) Update binding cannot locate session, returning
--
so I guess its an issue with vcenter server , or both PS arrays with their members needs to be rebooted.
thanks for the help
alshawwa
1 Rookie
•
29 Posts
0
July 10th, 2015 11:00
ok I wont reboot the arrays and yes I can get to both groups using gui and sanhq and cli with no issues.
the management ip address is set
and dedicated mgmt was configured by dell techs and yes it is setup correctly
I am not using ps group names , I am using group ip address to add them
thanks