This post is more than 5 years old
18 Posts
0
1241
December 23rd, 2016 01:00
Replication Compatibility
Can anyone point me in the right direction for replication compatibility between different model EqualLogics?
Im wanting to add a replication partner to my current SAN infrastructure as an extra level of backup
We have x2 SAN's which are not in the same group, these are:
PS4100
PS6100
Im looking to replicate data off both of them, or at least the PS4100. Can this even be done and if so would I need the same model SAN to act as the replica partner?
We are using iSCSI
Thanks
No Events found!
Origin3k
4 Operator
•
2.3K Posts
0
December 23rd, 2016 04:00
Hi,
Two different Groups = Async Replication is possible, you dont need the same models
Same Group = SyncReplication is possibe, models should the same or very similar
Life becomes easier when both are on the same FW level and in the same subnet without Routing/FW between the 2 groups and members.
Setup the relationship between both groups and specify the delegated space.