This post is more than 5 years old
1 Message
0
1442
October 31st, 2017 10:00
PS4110 connected to NON-Stacked PowerConnect Switch on VMWARE
Is it possible to deploy PS4110 (active/passive) to two non-stacked/non-LAG PowerConnect switch for our vmware infra. I tried deploying it but when switch CM0 to CM1, the storage becomes "iSCSI initiator connection failure". I already implemented port binding and all necessary setup for vmware.
Please advice if possible.
No Events found!
Origin3k
4 Operator
•
2.3K Posts
1
October 31st, 2017 10:00
No, because every EQL frontend port needs connectivity to each Server storage port.
Regards,
Joerg.