This post is more than 5 years old
1 Rookie
•
11 Posts
0
5499
September 11th, 2017 14:00
Equallogic PS4000XV: Drive not approved after Remplacements
Hello,
My problem is about a PS4000 with 16 HD (ST3600057SS, 15 K CHEETAH Dell Equallogic)
In The Last 3 month, i ve to replace two ST3600057SS by a new ones (Faulty HD detected).
I thought every thing runned fine, but now i notice a new warning about not approved disks. I dont now which HD are concerned.
When I look the hard drive view, i can see that the revision of the drive
- EN01 for the 14 HD (unchanged)
- EN03 and ES65 for replaced.
But no others Errors. All the disque are On line, and the ES65 is reserved.
I Want to identify the not approved disk and understand why ? Can you Help ?
No Events found!
spbest971
1 Rookie
•
11 Posts
0
September 12th, 2017 13:00
THX don,
but, those disks were bought and supposed to be equallogic HD. I think that the not approved HD is the one with the ES65 revision ? Do you know a way to be sure of that ? so i will be able to returned it to my vendor ?
spbest971
1 Rookie
•
11 Posts
0
September 12th, 2017 13:00
We ve made the update to the V9.0.5
spbest971
1 Rookie
•
11 Posts
0
September 14th, 2017 13:00
ok, after a physical check of the disks, the logo Equallogic isnt present on the disk. I ve to change this disk.
Thx for your help