This post is more than 5 years old
33 Posts
0
18520
March 25th, 2010 16:00
Memory question relating to a Dell PowerEdge T300 Server
My server is populated with 4 x 2GB ECC modules and have 2 slots spare, would I be able to populate these with 2 x 4GB ECC modules of the same speed CL etc?
Thanks for your help :emotion-1:
No Events found!
OndoyBahista
48 Posts
1
March 25th, 2010 18:00
You can use any sizes up to a 4 GB chip as long as you are within the max total capacity the server can handle.
OndoyBahista
48 Posts
0
March 25th, 2010 17:00
PowerEdge T300
darkmatter111
33 Posts
0
March 25th, 2010 17:00
Thanks for the info which I read earlier, I was just wondering if you have to stick to the same size modules throughout, as I already have 2GB modules installed.
darkmatter111
33 Posts
0
March 25th, 2010 18:00
Appreciated and thank you for the clarification :emotion-1:
darkmatter111
33 Posts
0
March 30th, 2010 07:00
As an aside I have located some of this RAM for sale, would this work in my T300 it has a very similar spec except the speed is 6400,
T300 specification in the manual states DDR2 PC-2 4200 & 5300 , these are PC2-6400
"In theory it should underclock , but cannot say this for 100%"
Would it?
Thanks
Simon :emotion-1: