This post is more than 5 years old
2 Intern
•
743 Posts
0
55277
February 29th, 2016 15:00
PE 2970's Model not showing
Hi,
I cannot get the Model (2970) to show in OME even though other information like Service Tag, IP address is recorded.
Is this a limitation because of the older DRAC 5's being used or is there a way around this?
Thx,
John Bradshaw
No Events found!
DELL-Martijn G
291 Posts
0
March 1st, 2016 00:00
Hi John,
If you look at the Support Matrix you will see that we don't officially support that generation of servers any more.
http://www.dell.com/support/manuals/us/en/19/dell-openmanage-essentials-v2.1/omesm/Supported-devices?guid=GUID-FF5E3B54-0B77-4E80-8415-07851262142E&lang=en-us
You could try to inventory it using SNMP but there are no guarantees that it will work.
bradje1
2 Intern
•
743 Posts
0
March 1st, 2016 12:00
Ah, thx M.
JB