This post is more than 5 years old
7 Posts
0
6408
May 19th, 2014 02:00
OME Firmware distribution and brutal reboot
Hi all,
I've been testing firmware distribution on OME 1.3 with some 12G servers being discovered by OME via iDRAC.
I've noticed that when I command the firmware distribution to a server, it gets brutally rebooted (I mean that the OS is not commanded a clean shutdown), then Life-Cycle controller starts and applies the updates.
Is this forced reboot the expected behavior? I have installed OMSA on the servers and thought that even if the discovery is done via iDRAC there would have been some interaction with the OS to have a proper shutdown.
Thanks
No Events found!
DELL-Rob C
3 Apprentice
•
2.8K Posts
0
May 19th, 2014 09:00
Hi there and thanks for the post.
Yes, this is the expected current behavior. We've seen times where the graceful shutdown does not fully shutdown, hence the force. Typically we recommend doing such updates during a maintenance window.
Hope this helps.
Rob