When using Unity CSI, is there a way to specify iSCSI Interfaces of Unity?

When I try to use an iSCSI-based PV, the iSCSI sessions are connected through all iSCSI interfaces of Unity.

If I want to use specific interfaces, is there any options for using a specific interface?

 

For example, if I have 4 interfaces for iSCSI on Unity, is it possible to use only 2 interfaces are used for Kubernetes?

The other 2 interfaces are used for different purpose, not for kubernetes.

  - All iSCSI Interfaces on Unity : spa_eth0, spa_eth1, spa_eth0, spb_eth1

  - for kubernetes : spa_eth0, spb_eth0

  - for other service : spa_eth1, spb_eth1

 

 

1. Operating System and its version
=> CentOS 7.9 (3.10.0-1160.24.1)

2. Orchestrator type and its version (e.g., Kubernetes v1.19.4 or OpenShift 4.7)
=> Kubernetes v1.20.2

3. Driver Version (e.g., CSI-PowerScale 1.7)
=> Unity CSI v1.6.0

4. Installer Type (Helm or Operator); In case of Operator, its version
=> Helm

5. Storage array version
=> 5.0