This post is more than 5 years old
50 Posts
0
1495
February 22nd, 2010 12:00
Cisco Fabric Manager to email alerts for MDS 9000
I'm told that I can use Cisco FM (unlicensed) to send email on selected alerts. So far I've been unable to figure out how. Is anyone doing this? My switches are running 3.3(1C) if it matters.
No Events found!
ConnectrixHelpe
259 Posts
0
February 23rd, 2010 11:00
Hello,
The FM based EMC Email Home for Cisco MDS config guide is only available to EMC field. If you plan to configure your switches for email home you need to engage your local EMC field support personnel. The main reason for this is that the field needs to ensure the switches are correctly configured in our systems to accept the emails from the switches. Without the correct configuration the emails will be disregarded by our front end rule server.
Thank you.
ConnectrixHelpe
259 Posts
0
February 22nd, 2010 12:00
Hello,
Yes, there are a variety of options on how to configure FM to send out email alerts. Are you looking to send them to yourself or to EMC?
Thank you.
Joe_Ab
2 Intern
•
227 Posts
0
February 22nd, 2010 23:00
follow cisco mds 9000 family cookbook Chpt 1 "configuring call home" .
Helper , could you please provide the emc email for callhome one ???
kirkb00
50 Posts
0
February 23rd, 2010 06:00