This post is more than 5 years old
1 Rookie
•
7 Posts
0
1801
June 27th, 2019 23:00
Required connection to peer controller enclosure not found on SAS port
Hi guys,
On SCv2020 I have nothing connected to SAS ports and have no intention to plug in an additional enclosure.
Should I ignore these kind of warnings?
Thank you.
No Events found!
Origin3k
4 Operator
•
2.3K Posts
1
July 4th, 2019 15:00
The SCv20x0 require 2 SAS cables cross connected. If you have nothing connected you have setup the system in a wrong way.
This is different compared to the newer SCv30x0,50x0 and 70x0.
Regards,
Joerg
DELL-Bob Mi
2 Intern
•
230 Posts
0
June 28th, 2019 09:00
Hello Nightwolf_82,
You should call in to support and have them check your system. The alerts you are seeing is because there is a disruption of the paths on the B side of your Enclosure. In an Scv2020 the 2 paths to each disk go through the top controller and the bottomg controller. Something caused the B side path to go down per the alert on 6/27 at 8:33 am. I would call in and have support check the system to determine why.
Nightwolf_82
1 Rookie
•
7 Posts
0
July 3rd, 2019 17:00
Unfortunately, the warranty expired a month ago so in the given situation it wouldn't be possible to rely on Dell support.
I'm just wondering if I can find out the root cause myself without involving support techs.
I have this for both I/O modules.
Just wondering if this is an indication of the whole SAN device malfunction.
Nightwolf_82
1 Rookie
•
7 Posts
0
July 4th, 2019 19:00
Could you please advise which type of SAS cables I should look for that would be compatible with 10G-iSCSI-2 Type B controllers.
Thank you.
Nightwolf_82
1 Rookie
•
7 Posts
0
July 4th, 2019 20:00
Please disregard my last question.
It's been resolved.