This post is more than 5 years old
1 Rookie
•
18 Posts
1
2217
July 17th, 2012 02:00
Where can I found a disk fw
Hello !
I need to upgrade the firmware of some 005048847 disks
the procgen give the string :
Drive firmware can be found on Powerlink at Home > Support > Software Downloads and Licensing > Downloads C > CLARiiON Disk Firmware
to found it but it is not available at this time
Where can I found this firm ?
Thanks
No Events found!
RRR
2 Intern
•
5.7K Posts
0
July 17th, 2012 05:00
Ah, ok. If you go through the old Powerlink to support and then a link called "EMC Service partners web access". Then the tab "software" and then you select "drive code".
RRR
2 Intern
•
5.7K Posts
0
July 17th, 2012 03:00
If you start USM to actually upgrade software or firmware, the downloads will be done from there
FRED16
1 Rookie
•
18 Posts
0
July 17th, 2012 04:00
Ok
But I need to be on customer site, connected to the CX AND with internet access to do that ....
With USM not connected on a array (at my office before to go on site) it is not possible .... not so good
RRR
2 Intern
•
5.7K Posts
0
July 17th, 2012 04:00
Well, if you start to upgrade from Unisphere, it will try to launch USM and I think I remember that the download of USM will start by itself from there.
rupal1
433 Posts
0
July 17th, 2012 04:00
USM can be downloaded from Powerlink :
Home > Support > Software Downloads and Licensing > Downloads T-Z > Unisphere Service Manager (USM)
Thanks
FRED16
1 Rookie
•
18 Posts
0
July 17th, 2012 06:00
Nice
this is the link that I missed, and yet I look for !
Thanks
RRR
2 Intern
•
5.7K Posts
1
July 17th, 2012 07:00
Thank you for not marking right answer as correct. Could you correct this please?
FRED16
1 Rookie
•
18 Posts
0
July 18th, 2012 12:00
done
rupal1
433 Posts
0
July 19th, 2012 00:00
Hi Fred,
Still we cannot see the thread as answered. Please mark the correct one.
Thanks
dynamox
9 Legend
•
20.4K Posts
0
July 19th, 2012 04:00
my
RRR
2 Intern
•
5.7K Posts
0
July 19th, 2012 04:00
good morning, Mr Dynamox!
RRR
2 Intern
•
5.7K Posts
0
July 19th, 2012 04:00
So which reply was the correct one and which were helpful?
RRR
2 Intern
•
5.7K Posts
0
July 19th, 2012 05:00
For me it says 2:23PM by the way, but that's because of timezones.....
dynamox
9 Legend
•
20.4K Posts
0
July 19th, 2012 05:00
freaking Europeans and their 3 month vacations, no wonder you have an economical crises.
RRR
2 Intern
•
5.7K Posts
0
July 19th, 2012 05:00
hahaha, sorry for the misunderstanding, but you initially marked your own comment as being correct while it wasn't even an answer. But now it's ok! I beat Dynamox to it
and that's always a good thing 