Sp-A and Sp-B seperate connection

Hello Team,

It is very urgent need , requiements

i have one EMC with attached to 1+1 cluster blades with A0 , A1 , B0 and B1 FC cables(no switch). I need to add two more new blades 1+1 in same chassis , but will use same EMC (no FC switch). I removed A0 and B1 from old blades and attach them to new blades , after this activity my veritas cluster was not coming up and veritas was no able to recognize the disk groups.

LUN's were shuffling between SP-A and SP-B inside navisphere GUI.

After all this , i re-attach the cables and use some commands from here and there to again recongize my Disk Groups. It was done.

Now , i need to use same EMC for new blades , so now i am thinking to move all the LUN in SP-B to SP-A and give them current owner and default Owner, so no LUN left in SP-B . Now i will remove B0 and B1 cable from old blades and attach them to new one, create new LUN and make there owner as SP-B.   Will this thing will work perfectly.

There will be no redundancy but this is fine as old blades need to be removed after sometime but while installing i require new blades connected with EMC with new LUN.

Please help me on this and provide your valuable suggestions soon.