Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

636

May 7th, 2013 07:00

Request sent to a non-owning SP.

hi friends!

please, what means Request sent to a non-owning SP ?

from de event number 0x71008043

thanks a lot!

2 Intern

 • 

812 Posts

May 7th, 2013 07:00

It means that a SnapView command was sent to a non-owning storage processor (SP). Refer to primus emc62530 .

1.4K Posts

May 7th, 2013 07:00

Event Code: 0x71008043 Request sent to a non-owning SP is an informational event which refers to LUN on the Owner SP for which the command was issued to no longer owns the LUN. Hence, the command will be send to peer SP/non-owning SP. This is by design and informational. It can be ignored.

You may also refer to KB Article: emc62530 which provides the similar information about the error.

1 Rookie

 • 

28 Posts

May 8th, 2013 00:00

thanks for yours time and your answer!

1 Rookie

 • 

28 Posts

May 8th, 2013 00:00

thank you! best regards!

No Events found!

Top