This post is more than 5 years old
8 Posts
0
697
June 18th, 2014 16:00
Report, or view, used space vs. available space for SAN newbie.
I am very new to supporting our SAN. I was asked to provide our used space vs. available space on our Cx4-240, Unisphere ver is v1.0.0.30. I've searched through existing posts in here, and couldn't find the tab that was mentioned, and the reports tab I can find says "No storage system in the domain supportthe functionality of generating report." when I run the Reports Wizzard.
I see the very high level view of how much space is carved out, and what's left when I open Unisphere. Is there a place to find how much of this space is used?
No Events found!
Archuperi721
110 Posts
0
June 18th, 2014 23:00
Could you please let us know whether you have pools configured? or Raid Group.
if its pool, then from the pool preperty (browse the tab Storage >> Pool / Raid Groups) you can find for each, otherwise you can use the Unisphere report (Monitoring >> Reports ), follow the one you're intended
dchristenson
8 Posts
0
June 19th, 2014 08:00
I have RAID groups. When I opened the Monitoring > Reports tab yesterday, it gave the errpr "No storage system in the domain supportthe functionality of generating report." Today it worked, but I also browsed to the RAID groups tab first, the Monitoring > Reports. Is this why it worked today?
Thank you for your help.