This post is more than 5 years old
10 Posts
0
650
April 25th, 2012 04:00
Do I've to deactivate lun before creating Remote Mirror
Hi,
Do I've to deactivate Lun before creating Remote Mirror when I'm creating for the first time that includes Lun Creation aswell. Can anyone provide any link or Doc to clear my doubts on replication concepts.
No Events found!
rupal1
433 Posts
0
April 25th, 2012 07:00
No you dont need to Deactivate the lun for creating a remote mirror :
I think you are wanting to ask that do i need to Fracture a lun
Anonymous User
457 Posts
0
April 25th, 2012 05:00
HI Kishore,
If this is MirrorView replication, please find the below mentioned Link:
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/White_Paper/h2417-mirrorview_knowledgebook-flare-wp.pdf?
Regards,
Suman Pinnamaneni.
KishoreD
10 Posts
0
April 25th, 2012 06:00
Let me put the Question right.
When do I need to deactivate lun in regards to remote mirror view replication.
kelleg
4.5K Posts
0
April 25th, 2012 07:00
Your question is not clear. When you start Mirrorview, you leave it running. If is Mirrorview Sync, it runs alll the time, constantly updating the mirror. If you're using Miirorview/Asunc, the updates happen on a schedule that you decide. With MV/A, when the update is finished, the update stops.
Deactivate sounds more like snapview. Are you also using Snapshots with Mirrorview? The referenced document above provides answers for using Mirrorview. There is a similar document for using SnapView, also available on PowerLink.
glen