Clariion CX4-120 Chassis with boot drives is not “enclosure 0”.

Hello All,

      I have this problem, the customer was used DAE with boot disk on second storage to migrate some data and address that to enclosure 1, after that they back with DAE to original system on enclosure 0, but now the SPA and SPB won´t boot. Acessing the POST Diag Menu and using DDBS Service sub-menu, checking the Drive Slot ID Check   , they show all drives at wrong slot. The question is, how to change disks "WRONG" to "CORRECT" slot ? all the disks are on the original position and I can access the Clarrion Utility Partition.

Checking LOOP 0

ERRORS found:

    SLOT 0 (Encl 0, Slot 0): Contains disk from LOOP 0 (Encl 1, Slot 0)

    SLOT 1 (Encl 0, Slot 1): Contains disk from LOOP 0 (Encl 1, Slot 1)

    SLOT 2 (Encl 0, Slot 2): Contains disk from LOOP 0 (Encl 1, Slot 2)

    SLOT 3 (Encl 0, Slot 3): Contains disk from LOOP 0 (Encl 1, Slot 3)

    SLOT 4 (Encl 0, Slot 4): Contains disk from LOOP 0 (Encl 1, Slot 4)

    SLOT 5 (Encl 0, Slot 5): Contains disk from LOOP 0 (Encl 1, Slot 5)

    SLOT 6 (Encl 0, Slot 6): Contains disk from LOOP 0 (Encl 1, Slot 6)

    SLOT 7 (Encl 0, Slot 7): Contains disk from LOOP 0 (Encl 1, Slot 7)

    SLOT 8 (Encl 0, Slot 8): Contains disk from LOOP 0 (Encl 1, Slot 8)

    SLOT 9 (Encl 0, Slot 9): Contains disk from LOOP 0 (Encl 1, Slot 9)

    SLOT 10 (Encl 0, Slot 10): Contains disk from LOOP 0 (Encl 1, Slot 10)

    SLOT 11 (Encl 0, Slot 11): Contains disk from LOOP 0 (Encl 1, Slot 11)

    SLOT 12 (Encl 0, Slot 12): Contains disk from LOOP 0 (Encl 1, Slot 12)

    SLOT 13 (Encl 0, Slot 13): Contains disk from LOOP 0 (Encl 1, Slot 13)

    SLOT 14 (Encl 0, Slot 14): Contains disk from LOOP 0 (Encl 1, Slot 14)

Summary:

    Total Disks in the Correct Slots: 0

    Total Disks in the WRONG Slots: 15

    Total Slots Checked: 15

Mod0 FCC 0 SFP Inserted

Success

Thanks.