This post is more than 5 years old
13 Posts
0
6674
May 17th, 2010 14:00
Centera SDK support for AIX 6.1
I am trying to find out when and if AIX 6.1 is going to be qualified by EMC The 3.2p5 SDK does not state aix 6.1 is supported.
No Events found!
This post is more than 5 years old
13 Posts
0
6674
May 17th, 2010 14:00
I am trying to find out when and if AIX 6.1 is going to be qualified by EMC The 3.2p5 SDK does not state aix 6.1 is supported.
Top
mckeown_paul
409 Posts
0
May 18th, 2010 12:00
yes there should be no problem
mckeown_paul
409 Posts
0
May 18th, 2010 06:00
We do not qualify AIX 6.x but rather we rely on IBMs statement of binary compatibility that any 5.x binary will work on future revs of AIX
http://www-03.ibm.com/systems/power/software/aix/compatibility/
hrbivore
13 Posts
0
May 18th, 2010 08:00
Thanks for the speedy reply Paul! Based on those statements if an issue is encountered with 3.2p5 on an AIX 6.1 OS, will we be able to utilize our normal support methods? Such as opening a ticket for troubleshooting, analysis or debugging?
thanks
scott
jenny_lam
1 Rookie
•
57 Posts
0
October 18th, 2010 10:00
Wondering will AIX 6.1 be stated as supported in the Release Notes in the upcoming release? If not, what is the schedule to have AIX 6.1 officially qualified? Thanks.
mckeown_paul
409 Posts
0
October 18th, 2010 10:00
PLEASE NOTE ROADMAPS CAN CHANGE
AIX 6.1 is currently being included in our QA testing.
SamPrice
2 Posts
0
June 14th, 2012 03:00
Hi Paul,
I was wondering if EMC have now qualified the Centera SDK for AIX 6.1. If not is there anything we should be concerned about when using the comination of SDK 3.2 (p6?) and AIX 6.1 TL7.
Many thanks,
Sam