This post is more than 5 years old
6 Posts
0
1050
March 28th, 2011 02:00
User access AD with NX4 ( access denied )
Dears,
I was testing the NX4 before i do the real implementation .
I was testing it with two users one active domain and the second test user with no privilege.
After finishing everything i tried to access from other user on the domain and i got from all users access denied.( permission denied if i am correct)
I even tried to copy the users from LDAP with MANAGE LDAP and i got an error something related to settings while everything was ok .
What have been done:
Create CIFS server , join to domain , mount a share
Use the CIFS MMC to create home folders
mount iSCSI Luns.
I dont know if i these two users were kept in cache and the link with the AD had brake down.
I appreciate your help .
Regards.
nandas
4 Operator
•
1.5K Posts
0
March 28th, 2011 14:00
You need to have at least one CIFS share created in order to access the CIFS server from a windows client.
Also, what is your user-mapping method? Are you running Usermapper (by default it is on) on the data mover - check it out by going to CIFS - Usermapper
And to recap your situatuion - your CIFS server is joined to the Domain but only two users can access it - not any other user even from the AD - is that so?
Did you change the share level permission (Not the NTFS security- but the share permission)? Check it out as well. By default the share level permission is everyone full control.
As Rainer suggested, please check the data mover log (server_log command) when you are trying to access using the users.
My 2 cents
Sandip
Rainer_EMC
4 Operator
•
8.6K Posts
0
March 28th, 2011 13:00
Take a look at the data mover log using server_log if there are any errors when you access
Rainer_EMC
4 Operator
•
8.6K Posts
0
March 28th, 2011 13:00
A server_checkup can also point out potential causes
Rainer_EMC
4 Operator
•
8.6K Posts
1
March 28th, 2011 13:00
I would suggest to logoff your Windows client and the login again
ONE Windows client only ever uses ONE set of credentials talking to one CIFS server
Fadi_D
6 Posts
0
March 28th, 2011 13:00
Dear,
I tried so many times and no success, only these two users can access and the others cannot.
Dont know if i messed up with some permissions , cause even when trying to access the CIFS server with no shares at all i get the access denied check permission message for all other users.
Fadi_D
6 Posts
0
March 28th, 2011 13:00
Thank you for your quick reply,
i will check it tomorrow and get back to you.
If you have any other helpful steps to do i would be grathful .
Btw is there a way to reset everything?
Thank you again
Fadi_D
6 Posts
0
March 30th, 2011 02:00
Dears,
problem was solved by disabling and re enable the usermapper service .
Thank you