This post is more than 5 years old
20 Posts
0
724
September 16th, 2011 10:00
Site Fail over - Where to start?
I am starting a project to setup our DR Site-failover and manual CIFS fail-over's for our Celerra's (NS40's) and have been looking for documentation to set it up. I hate to ask but can someone point me in the right direction, I'll do the leg work but I can't seem to find the right starting point? Many Thanks in Advance!!!
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
September 16th, 2011 10:00
Using Celerra Replicator (V2) 6.0.41 A02
Rainer_EMC
4 Operator
•
8.6K Posts
1
September 16th, 2011 13:00
Plus the VDM manual
christopher_ime
2K Posts
1
September 17th, 2011 21:00
To help set up the replication sessions, another document that might be worth reviewing to complement those above that have already been referenced is the following:
White Paper: Migrating Data from an EMC Celerra Array to a VNX Platform Using Celerra Replicator
This is available from PowerLink via the following breadcrumb trail:
Home > Support > Technical Documentation and Advisories > Hardware/Platforms Documentation > Celerra Network Server > White Papers
Of course, the references to VNX can easily be replaced with the proper reference for the appropriate target hardware.