This post is more than 5 years old
295 Posts
0
421
September 14th, 2010 06:00
sancopy from HP-EVA TO backend NS120 - after completes how add lun as a FS
Hi i have a doubt,
is it posible to use sancopy to migrate a lun from an HP EVA stororage to a lun created on an NS120
if this is posible, after copy completes, can i integrate that volume to the NAS and see it as filesystem
and present it as share in a CIFS server?
other question
does the ns120 acept aditional ultrafex io module with FC connector to use them in the frontend
mc
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
September 14th, 2010 06:00
you can use SanCopy to copy from HP to Clariion but you will not be able to turn that LUN into file system, it's a block devices.
Rainer_EMC
4 Operator
•
8.6K Posts
1
September 14th, 2010 07:00
Yes,
a NS-120 can be upgraded to a NS-120FC with additional front-end FC ports plus a license
Rainer
jelucho
295 Posts
0
September 14th, 2010 08:00
so this means that I need to use a simple copy and paste
between server that are sharing folders that comes from HP-EVA ---- to the share share folder of CIFS server coming from ns120?
i have to move a lot of images, and i dont know ho much time is gona take that process, any way or any tool to do this job
i heard about emcopy...
mc
dynamox
9 Legend
•
20.4K Posts
0
September 14th, 2010 08:00
yes, you will need to do host based migration, emcopy is a good multi-threaded tool. The first copy is going to be a full copy, all subsequent copies will be incremental copies.