This post is more than 5 years old
46 Posts
0
2197
May 28th, 2013 21:00
How to change the celerra replication update time
Now the celerrareplications are happening to the every 12hrs,But I want to change this to 24hrs.
Please let us know where can I change the schedule.
I am using unisphere,array is NS-480.
No Events found!
Aswinkumar_bafd83
46 Posts
0
May 30th, 2013 20:00
Thank you Dynamox
I got
$ nas_replicate -modify iscsi_rep1 -name iscsi_rep2 -max_time_out_of_sync 90
it is working
Peter_EMC
674 Posts
1
May 28th, 2013 22:00
check the -max_time_out_of_sync parameter of the replication.
If it is set to 720 (720 minutes or 12 h) change it to 1440 minutes.
dynamox
9 Legend
•
20.4K Posts
0
May 28th, 2013 22:00
Is update policy set to “manual refresh” ? If it is then you control that process by deciding when to run “nas_replicate –refresh” command
Aswinkumar_bafd83
46 Posts
0
May 28th, 2013 22:00
no It is
Aswinkumar_bafd83
46 Posts
0
May 30th, 2013 03:00
Hi Peter,
Thanks for reply,
Please let me know how set that (max_time_out_of_sync) parameter.(command/parameter place in unisphere)
dynamox
9 Legend
•
20.4K Posts
0
May 30th, 2013 04:00
man nas_replicate
Aswinkumar_bafd83
46 Posts
0
May 30th, 2013 05:00
[root@CX480 ~]# man nas_replicate
No manual entry for nas_replicate
dynamox
9 Legend
•
20.4K Posts
1
May 30th, 2013 05:00
Login as nasadmin, not as root
dynamox
9 Legend
•
20.4K Posts
0
May 30th, 2013 20:00
here is the manual
https://support.emc.com/docu10563_Using-Celerra-Replicator-%28V2%29-6.0.41.pdf?language=en_US