This post is more than 5 years old
19 Posts
0
661
October 25th, 2012 05:00
How do you add manually created LUNs and with RAID5(6+1) RAID Group to Celerra
I'm getting these error message:
17716810659: server_2 c0t1l10 skipping unmarked disk with health check error,
APM0009360XXXX stor_dev=0x001A, RAID5(6+1), doesn't match any storage profile
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
October 25th, 2012 05:00
make sure disk/raid group count matches appropriate layout.
http://corpusweb130.corp.emc.com/ns/common/post_install/Configure_storage_Non_FC.pdf
MotoMando
19 Posts
0
October 25th, 2012 06:00
2 x RAID5(6+1) is not a supported RG configuration for the NS-120 per the doc. Will have to use R6 12+2 or 6+2 and 4+2.
MotoMando
19 Posts
0
October 25th, 2012 07:00
The customer wanted to use all 14 drives for a specific file system for capacity (plus 1 hot spare). Of course, all the exisiting drives were of different types.