This post is more than 5 years old
6 Posts
0
826
March 11th, 2011 07:00
Change subnet Celerra NS20
Hi, at a customer, i need to change the subnet of the celerra Public IP from 255.255.0.0 to 255.255.255.0.
I think to change for first the celerra manager subnet, the spA subnet, the spB subnet and for last the CIFS subnet.
There is a best practice?
Any suggestion?
Thanks in advance....
Sorry for my English
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
March 11th, 2011 07:00
to change the backend you can use this procedure: emc174327
as far as changing CIFS server subnet mask, that's easy. You would go under Network, select your interface, properties and then change the mask.
Devid1
6 Posts
0
March 11th, 2011 08:00
So, the step are to change the Control station subnet, under Control Station Properties, use clarioon-mgmt script for change the subnet of the SP, and finally change the CIFS subnet under Network->Interface.
Is it true?
Thanks in advance...
Devid1
6 Posts
0
March 11th, 2011 08:00
Or, for change the sp Address is best to use clariion_mgmt -modify -spa_ip xxx -spb_ip xxx command?
Devid1
6 Posts
0
March 11th, 2011 10:00
The DART version is 5.6.
I need to change all the IP Subnet, Control Station,Data Mover SP and CIFS interface.
What's the best practice? clariion_mgmt script, web interface or what?
Thanks in advance....
Rainer_EMC
4 Operator
•
8.6K Posts
0
March 11th, 2011 10:00
It depends whether you need to change data mover interfaces or control station / storage processor interfaces
dynamox
9 Legend
•
20.4K Posts
0
March 11th, 2011 10:00
use the clariion_mgmt -modify -spa_ip command to change the mask on SPs, i believe that script was for older DART versions.