This post is more than 5 years old
1 Rookie
•
39 Posts
0
1636
January 19th, 2015 09:00
Manual cp validation option gone? v7.0.2-47
Avamar v7.0.2-47; currently running task is 'balance'. There are unvalidated cp and one validated one.
I can no longer click on the unvalidated cp and choose to validate it. It is also not even a greyed out option in the "Actions" menu under the server tab.
Was this option removed?
Thank you.
No Events found!
ionthegeek
2 Intern
•
2K Posts
2
January 19th, 2015 09:00
This option was removed by my request. I have never seen this button used appropriately. Checkpoint validation should be left to the maintenance scheduler.
simple_gifts
1 Rookie
•
39 Posts
0
January 19th, 2015 09:00
Thanks for the fast reply.
Our site runs secure delete quite frequently; occasionally we get a gc failure due to disk full and I would cut a new cp, validate it, and then roll off an old cp, which seemed to free up space. It seems the maintenance cycle/activity has been fine tuned over the years (I started @ v5.0 avamar 'the day it was released') I can reevaluate to see if another recovery technique might work.
ionthegeek
2 Intern
•
2K Posts
0
January 19th, 2015 12:00
I sent you a PM.