Switch 3100 series - How to use/configure SSH conection in VLAN 1?

Hi,

im trying to configure a s3148 switch, to fill the following requirements:

- An ip address to the device, for SSH access without use the management port and a created VLAN;
- Gigabitethernet 1/1-1/4 for a VLAN; -> (OK) 
- Gigabitethernet 1/5-1/48 access mode for none VLAN; -> (OK)
- Tenethernet 1/1-1/2 trunk untagged. -> (OK)

In another Dell switches series, and switches from another companies too, i can set the IP address to the default VLAN (VLAN 1), access the device throught SSH, and configure the ports to work in access mode still in this VLAN.
Can i do that in s3100 series?