1 Rookie
•
2 messages
0
32
19 juin 2025 21:38
RAM Stuck at 4800 MT/s after install of 2x16 Gb Kingston Fury 5600 MT/s
I have recently purchased two 16Gb Kingston Fury RAM sticks rated for 5600 MT/s but when looking into the task manager and AWCC, I can see that the memory speed is still 4800 MHz. Is there a way to fix this? Also, before the upgrade, the memory speed was also 4800 MHz, even though i had two 8GB 5600 MT/s sticks. My computer is the Alienware M16 R1.
Aucun événement trouvé !
REV78
2 Intern
•
287 messages
1
20 juin 2025 07:21
depending on the version & processor, please read the whole page Memory specifications
MBrass
1 Rookie
•
2 messages
0
20 juin 2025 15:22
@REV78 Thanks for pointing this out. After consultation, my memory setup indeed only support 4800 MHz. It also looks like 32 Gb is not even supported by the processor, even if i was able to see that more memory was available after installing the new ram. My guess is that even if the extra memory was displayed, i would not have been able to use it? At least now I will be returning my ram. Cheers!