Force10 S4810 sfp ports doesn't work after extracting an 1G rj45 sfp

I have a couple of s4810 that the SFPs ports doesn't work with 10Gb fiber MM or SM after it have been used with SFPs of 1G rj45 SFPs. The ports seems ok but they don't work. Sometimes the port is up but the device on the other side is down because doesn't receive any signal, and sometimes the port is down but the other side is up (depending of the port). Both, bable and SFP has been checked in other device and it works, and also it works in a different port. If I put back the 1Gb rj45 SFP, then it works...

Did it happened to anybody?