Unsolved
This post is more than 5 years old
3 Posts
0
7552
May 12th, 2015 04:00
Pink screen after Xenith Firmware 1.7 upgrade
Pink screen after Xenith Firmware 1.7 upgrade
After upgrading firmware from 1.6 to 1.7, the secondary screen is pink (see attached picture). The Xenith is setup with a split with a DVI cable to primary monitor and VGA to secondary monitor. It strangley doesn occur after the first reboot but after the second.
I've stripped out the xen.ini to almost nothing and seen it occur on 10+ devices so it appears to be firmware related but maybe an ini setting will resolve it. I've played with the refresh rates and resolutions as well.
Any ideas?
No Events found!