Unsolved
This post is more than 5 years old
1 Message
0
18927
June 8th, 2015 05:00
Wyse WSM 2.3 and multicast
Wyse WSM 2.3 and multicast
Hi, i've heritated a project on Wyse WSM 2.3, we have a classroom with about 25 computers. I'm using an ESX with a 3gbit NIC teaming and load-balancing for the streaming. My computers take about 3min30 to boot. Between the ESX and the classroom, there is a Cisco Stackwise 3750g and the ESX and the Wyse server and the classrom are on the same VLAN.
Do you think this is a good performance ?
Also, multicast appeared to be enable but i can't find any wyse white paper about it therefore i don't realy now how it is configured.
Sorry about my english
No Events found!
hdlnd
5 Posts
0
June 9th, 2015 03:00
You should upgrade or reinstall your WSM to version 3.6.1(latest version) before thinking about multicast. It should improve performance, which from what you are reporting is not what I would call good.