Unsolved
This post is more than 5 years old
11 Posts
0
10347
May 18th, 2015 05:00
x90m7
x90m7
I had previously setup a WYSE laptop x90m7 on our domain and added the user that I wanted saved to the ini file and this worked well. We have since bought 17 of these machines that are newer by about a year. My problem is that when I join it to the domain, add the user to the ini file and user profiles and then try to login it loads a temporary profile instead. Even when I change the local gp to not allow temp profiles it still loads on a temp profile. If I include a do not allow gp through the domain it will not allow the logon at all.
Hopefully someone could assist in this situation.
Thanks,
Bruce A.
No Events found!
bb127
11 Posts
0
May 28th, 2015 01:00
Apparently, when you allow the user to be listed under the [SavedProfileList] at the bottom of the netXclean.ini file, you will get a temporary login each time. Not sure why, but that is what was happening.