Unsolved
This post is more than 5 years old
2 Posts
0
33284
August 14th, 2015 08:00
WES7 Unable to reimage D90D7 - Files is EXE, not RSP
Hi, I am trying to flash tc with new image, but image is .exe not .rsp...Where do i find the .rsp image file?
No Events found!
RMontalvo
2 Intern
•
560 Posts
0
August 18th, 2015 10:00
Timothy,
When you get an EXE file, you need to execute the file to extract the contents. Once extracted, you will see all the required files, including the .RSP file.
TIMOTHYP88
2 Posts
0
August 18th, 2015 10:00
I was able to download and extract the .exe.. When I re-image the thin client, the install fails,,4 times now. Is there a firmware upgrade, not the image itself, that I need for the Wyse D90D7? Any help would be greatly appreciated:)
spoolin01
1 Rookie
•
19 Posts
0
August 27th, 2015 17:00
What is the nature of the failure, any error message? There can be a number of simple reasons (not hardware or installer malfunction) for the re-imaging to fail, and this id soubly true for the Dx0 and Zx0 series as there is also the issue of 1st and 2nd generation units - image build selection must match the generation number.
If you provide some additional information, it will make troubleshooting your problem easier:
-D90D7 product number
- installed flash size
- current image build # installed
- intended image build #
- current BIOS version