Unsolved
This post is more than 5 years old
1 Message
0
6416
May 19th, 2015 07:00
Unable to build USB key for Win 8 models - Z90D8 and D90D8
Unable to build USB key for Win 8 models - Z90D8 and D90D8
Hi all,
I can't seem to build a USB "push" key for the Win 8 models - Z90D8 and D90D8. I'm using the USB firmware tool version 1.19.0.4 and everytime I select the RSP file, it gives me an error saying "invalid RSP file for the OS type selected.". I did select Windows 8 Embedded on the tool so I'm not sure what's going on. I did some research and apparently there is a USB Firmware tool version 1.2 that might work but I'm unable to find this anywhere around the site. Any tips or tricks around?
Thanks,
Elmer
No Events found!
Rmontalvo1
623 Posts
0
May 28th, 2015 09:00
What is the filename you are using?
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]