Install SSD inside Z90Q7P

Douglas,

The internals SSD requires a custom cable and a bracket inside the TC. These are normally factory installed options. Contact you sales rep for more details.

Hi both,

I want to do the same.

Given your response was unhelpful, where/how do we contact our rep?

I believe it is a 4 pin to 15pin, but I am NOT certain which connector it is on the board, as I haven't bought an adapter yet. Usually, if it fits, it works... Thoughts?

Douglas, I know you posted awhile ago, but have you managed to get something working? the other option is to replace the flash mlc drive with a bigger one. They aren't as fast as ssd, but i don't think you'll notice the difference.  I have seen 64gb/128 and 256. Another option would be to remove the 4gb chip you have an install a converter from the board input into a separate SATA/Power cable. 

Let me know how you're going

http://www.ebay.com.au/itm/MyDigitalSSD-Super-Cache-2-128GB-mSATA-Mini-25mm-SSD-MDMSM-SC2-128-/252111072951?hash=item3ab2fdaeb7

http://www.microsatacables.com/intel-4-pin-power-to-15-pin-sata/

www.microsatacables.com/.../intel-4-pin-power-to-15-pin-sata

so, I believe, we could use a sata data/power extension cable plug in where the 16gb small slim mSATA is and remove it all together. 

16gb small slim mSATA

Yeders,

You can do that, use a third party cable, but be aware that that will void your warranty. You could use a standard SATA data cable, and a 17-pin to 4 pin cable. I don't know where to get the power cable, so i'll leave that to other contributors.