Figured out how to use a USB drive larger then 32gb with the USB imaging tool

Figured out how to use a USB drive larger then 32gb with the USB imaging tool

So the limitation is that you have to use a drive formatted with fat32 but anything larger then 32gb uses ex fat. So here is what you will need.

Flash Drive under 32gb (Can be too small for your image mine is 8gb and requires a 16gb to pull)
Your Larger Flash drive
I used a tool called guiformat-x64

I used the guiformat tool to format the drive to fat32 but if I now try to load the pull files using the usb imaging tool it will reformat the drive loosing my fat32 so..

Use the Wyse imaging tool to setup your small usb drive to pull the image.
Copy the files from the small usb drive to the large usb drive

Boot the Thin client using you small usb drive. Select the drive and right after you see the yellow and white screen pull the small usb drive and insert the large usb drive in the same port.

You should now be able to pull your image.

To deploy your image use the same small usb drive with the pull config. Just like in the last step swap the usb drives for the larger drive with the image and you can push that image to another thin client.