Unsolved
This post is more than 5 years old
1 Message
0
14792
May 18th, 2015 05:00
DPC CPU Usage - Windows 7 vs Windows Embedded Standard 7
DPC CPU Usage - Windows 7 vs Windows Embedded Standard 7
Hi,
I work for a small company which sells computer vision equipment. They have an industrial camera connected to the LAN port on a PC. We are currently using Windows 7.
Recently, I have tested our software with Windows Embedded Standard 7, and I have noticed a decrease in the performance of the equipment. In order to find out the problem, I have used Windows Performance Toolkit. I have noticed that, with Windows 7, the DPC CPU Usage is shared between the 2 cores of the CPU, but with the Embedded edition, all the DPCs are managed by the same core. I guess that this is what is causing the decrease in the performance.
The problem is, that I do not know how to change this. Is there any setting, command or something, that could help me?
Thanks in advenced
vip_kass
25 Posts
0
May 18th, 2015 05:00
Prio, will do the trick, ive used it to set process priority of one core, two cores, set Set affinity, I/O priority on my D90D7 TC's. I had to install SCCM agents and there were killing my TC so this is what I came up with, it as well as some other tasks get one processor and low prorities on everything, this helped my boot times by 30\40 sec.