Unsolved
This post is more than 5 years old
6 Posts
0
3238
May 18th, 2015 09:00
Dell Wyse Embedded Standard 7 - Unable to get printer to work
Dell Wyse Embedded Standard 7 - Unable to get printer to work
Hi
I have a Dell Wyse Embedded Standard 7, Im trying to get Star sp298 to work connected by parallel port.
When try print txt file E.g test it prints out with a load of random txt it still does this with the printer driver installed.
If I try an old Dell Wyse ce pro 5.0 works perfect.
Can someone help ?
No Events found!
Rmontalvo1
623 Posts
0
May 18th, 2015 09:00
You may want to include the model number of the device you are using, or go to www.wyse.com/downloads and verify that you have the latest version of firmware installed. Are you using any adapters or is this connected directly to the printer port?
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
mikebrickles
6 Posts
0
May 18th, 2015 09:00
I have tried re-flashing the working dell wyse same model with the one that will not work but still same problem
Both wyse are ZX0
Working one made in Feb 2014
and not working one made in sept 2014
Printer connect direct to dell wyse
mikebrickles
6 Posts
0
May 18th, 2015 09:00
Both wyse are ZX0
Working one made in Feb 2014
and not working one made in sept 2014
Printer connect direct to dell wyse
Found the problem the LTP Port is faulty on the dell wyse check another new dell wyse which was ordered worked fine.