Unsolved
This post is more than 5 years old
2 Posts
0
5715
July 2nd, 2015 08:00
Are V30 and v30L models compatible with XenApp 6.5?
Are V30 and v30L models compatible with XenApp 6.5?
Hello. I am not that familar with Wyse thin clients and need to confirm if the older V30 and V30L models will work with XenApp 6.5. If they are compatible, what firmware image should be installed on them? Are there any limitations to be aware of?
The OS on these devices is Windows CE .NET, but I noticed we have a couple with Windows CE 6.0. Can they all be upgraded to Windows CE 6.0 and what is the advantage?
Also, will these be able to connect through Citrix's Web Interface and run multiple published applications, or are they just able to connect directly to a XenApp server and run one published application?
Thank you for your help.
Rmontalvo1
623 Posts
0
July 2nd, 2015 08:00
John,
from the Dell Wyse stand point, these devices are End-of-life, so no testing has been done with them since they were discontinued. You can go to www.wyse.com/downloads and search for the V30 under the Retired window and press search. You should see the last version tested for these devices. For the V30L go to the same page, but under the Active windows. good luck.
Roger Montalvo
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
[SIGPIC][/SIGPIC]
jminiello-gotha
2 Posts
0
July 2nd, 2015 08:00
Can anyone offer any information on this? Thank you.