Unsolved
This post is more than 5 years old
1 Rookie
•
22 Posts
0
11392
August 21st, 2019 07:00
Wyse 5070 not booting to USB
I am the Dell Image on a USB stick and am trying to re-image one of my Thin Clients, however, it will not boot to USB even though I have changed the boot order with USB being first. Any other ideas? I have been able to boot to USB from my other 5070 Thin Clients. Thanks!
No Events found!
mafischl
1 Rookie
•
56 Posts
0
August 30th, 2019 18:00
Confirm that the USB Boot Option is enabled in the BIOS.
Default BIOS Password: Fireport
BenGoreX
1 Message
0
July 17th, 2021 11:00
I can confirm that this solution works. All you have to do is to enable the USB booting option in BIOS. Simply expand all the branches in the BIOS tree and look for the ones that mention USB. One of them will enable you booting from USB (this is disabled by default)
Joe915
1 Rookie
•
1 Message
0
December 18th, 2024 02:45
Mine was stubborn. I had to block from the boot up menu the internal drive. I had put USB first in the menu after checking all the other options in BIOS for USB, and still failed to boot from USB. I then removed the internal drive from the list. It failed to boot. Took a look at the system and the 1 and 2 USB ports apparently were not cabled. Used the ones on the back. Which most likely means, it would have booted if I had used a back port.