Unsolved
This post is more than 5 years old
18 Posts
0
1629
April 25th, 2019 11:00
WMS 1.3 can't pull image from 5070 WES thin client
I am converting from a WDM server to WMS 1.3 and I am having problems pulling an image from the 5070 thin client.
As a simple test, I tried to pull the default image from the 5070. I setup the pull request from WMS and get the pull request message on the WES thin client. I select pull now and it reboots. It goes through the boot process and starts the Merlin boot. I then get the following error message:
WMS repository server not available or required imaging files are missing
I do have the latest WDA software loaded (14.3.0.66).
I suspect that I am just making a rookie mistake or missed a step in the configuration process.
Any suggestions?
No Events found!
DELL-Scott H
Moderator
•
897 Posts
0
April 25th, 2019 18:00
In addition to the latest WDA, make sure you push the latest Boot agent to the device as well.
Phtr
1 Rookie
•
5 Posts
0
April 29th, 2019 21:00
Could you please post version of bios and windows image you had installed?
I have problem that after client restart it doesn't even boot to merlin, but boot straight to windows os
it can be related to bios version i think, so any information you could provide would help me
thank you in advance