Wyse 3040 and WDM 8 to 9

Hi, 

WMS Gui experience is easy to manage the thin clients instead of INI. 

ThinOS Guide: https://dl.dell.com/topicspdf/thinos_9_1_ag_en-us.pdf

WMS Guide: https://dl.dell.com/topicspdf/wyse-wms_administrator-guide14_en-us.pdf

for RDP connection: 

Add MVD package - https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=r3kw1&oscode=thn80&productcode=wyse-3040-thin-client

Advanced --> Broker settings --> Global Broker Settings --> set the broker type as NONE

Advanced --> session settings --> RDP & WVD session settings --> under Direct RDP collection --> Click on the right side ADD ROW and fill the details. 

Upgrade ThinOS 9.1.2101

download the package - https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=v65f0&oscode=thn80&productcode=wyse-3040-thin-client

Factory reset the device and delete all the packages(system tools --> packages --> select and delete)

Delete the packages from the WMS group and just add the firmware package. 

Regards, 

Kumar 

1) under the policy, Logon Type, change authenticate to broker to authenticate to domain controller.

2) For minor builds (9.1 to 9.1 MR1) there will be 2 files posted.  There will be a FULL and a DIFF.  The full will be used for updating from 9.0 to 9.1 MR1, the Diff will be for updating from 9.1 to 9.1 MR1. 

3) For RDS connections you will need to deploy the Microsoft WVD package.  The WVD package will be used for both WVD and RDS.

Sorry for my late response, but I will continue with it this week!