Unsolved
This post is more than 5 years old
3 Posts
0
2677
November 29th, 2017 04:00
Wyse management suite
Hello
We start using wyse management suite to all our Thin clients (Wyse D10D). We created some groups for each branch and one testing group. When we´are trying to change group for any thin client to any groupd it change it´s resolution. Is there any solution how to do that, thin client will keep up resolution ?
In groups there are no display configuration configured.
No Events found!
RMontalvo
2 Intern
•
560 Posts
0
November 29th, 2017 09:00
Lubos,
If you don't have the Display configuration configured, it will keep the current display configuration that the thin client has. This applies to ANY un-configured WMS parameter on the thin client. Please specify if this is WMS Pro or Standard and if on-premise or cloud based.
Lubos B.
3 Posts
0
November 30th, 2017 00:00
Thank you for reply. We have standard on-premise. But we havent configured display configration.
For example, we have two groups : group1 and group2:
all tcs are on group 1, when i change group for for example one TC from group1 to group2, it change its group and change screen resoltuion (Screen resolution as TC put to factory reset - but change only resolution). We are using span mode with 2 screens witch resolution 1920x1080.
Any idea ?
RMontalvo
2 Intern
•
560 Posts
0
November 30th, 2017 08:00
By default, the thin clients are configured for single monitor, so if you want to use Dual monitor mode, you need to define the display options. See screenshot below.
Lubos B.
3 Posts
0
December 1st, 2017 05:00
Thank you, but nothing changed, screen´s are still changed to smallest resolution. , now its changed to span mode, but smallest resolution.
I cant set screen resolution by display configuration in WMS, because not all screens are 1920x1080, not all TC have two screens ...
Any other idea ?