Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

D

dextercai

1 Message

2064

May 25th, 2018 01:00

Hard disk on Wyse 5020

I recently bought an Wyse 5020 on eBay. And I want to install a 3.5" hard disk on it. I found there is a 4 pin plug. But I am not sure the voltage for each pin, I am worried if it will damage a hard disk. So is there any information or documents about the motherboard of the Wyse 5020? Or any suggestions for the 4pin plug.

D.Toledo

2 Posts

August 22nd, 2018 10:00

I at first thought my Wyse 5020 had a 4 pin floppy connection. But it did not. After further research on this website: https://www.parkytowers.me.uk/thin/wyse/z/z90d7/index.shtml I found that the connections are 1.25 and 2.00 mm spacing JST plugs. According to what he says. I pulled out my DMM and on my 5020 Wyse the 1.25 mm spacing has 5v rails and the 2.0 mm one has 11.9 volt (or 12v) rails. Good luck.

Was this post helpful?

View All

No Events found!

Top