Unsolved
1 Rookie
•
3 Posts
0
27
August 19th, 2025 05:51
Setup/web console not starting after WMS 5.2 install
Hi.
I've installed WMS 5.2 standard in a lab (standalone Server 2022), and things worked fine.
Then I installed WMS standard the exact same way in a customers environment. Only difference is that server is now domain joined. no GPO's or anything are applied. After installing WMS, the web server doesn't respond at all.
Tried different browsers, just in case.
Anyone experienced this and have a solution / hint?
No Events found!
DELL-Scott H
Moderator
•
888 Posts
0
August 20th, 2025 13:03
I normally see this when there is a port conflict.
see if this is relevant
https://www.dell.com/support/manuals/en-us/wyse-wms/wms_4.4_ag/dell-tomcat-service-does-not-start-after-you-install-system-center-configuration-manager?guid=guid-e7ccd418-b2a0-4636-8426-b936c653e268&msockid=353971771c10674a3beb657d1d14667d
Carsten_11
1 Rookie
•
3 Posts
0
August 25th, 2025 06:33
@DELL-Scott H Thanks for your response. Unfortunately your suggestion didn't do a difference.
Is there, in you experience ANYTHING to consider differently, when installing on a domain joined server compared to a standalone server?
WMS itself is standalone (DB's are local etc).
Br. - Carsten
Carsten_11
1 Rookie
•
3 Posts
1
August 25th, 2025 09:20
Hi again.
I can see WMs 5.3 has been released today.
with no further explanation - installing v5.3 solved the issue, web portal is responding now.
Br. - Carsten
DELL-Scott H
Moderator
•
888 Posts
0
August 25th, 2025 12:07
I am glad to hear 5.3 has resolved it. To answer your question, nothing about joining should cause it to fail.